A dryer install is a short sequence of checks, and the order matters. Each check is a point where you can continue, fix something, or call for help.
Before delivery
Measure the space, the doorway, and the path the carton will take. Find the outlet or gas connection and confirm it matches the model's label. Trace the vent route from the back of the machine to the outside, and note the duct material and the length. If the route is long or crosses a wall you cannot open, plan for that now.
On delivery day
Inspect the carton and the unit before the crew leaves. Look for dents on the drum, cracked panels, and loose parts. Set the unit level, with the feet adjusted so it does not rock. Keep clearance at the back for the vent and the hose.
Connect the power or gas
For electric units, confirm the outlet type and the cord or hardwire match what the model requires. For gas units, check the shutoff and the connection for leaks with soapy water, never with a flame. If you are unsure about either connection, stop and have a licensed trade finish it.
Connect the vent
Use the duct material the manufacturer names. Keep the run short and smooth. Avoid crushed hose and sagging sections where lint will collect. Make sure the outdoor hood opens freely and the flap is not blocked.
Run the first test
Run an empty cycle on the lowest heat setting the model lists. Check the outdoor hood for airflow. Watch for odd smells, unusual noise, or a drum that does not turn. If the airflow is weak or the unit smells of burning, turn it off and recheck the route and the connections before you run it again.
Keep the install record
Keep the model and serial numbers, the install date, your vent route notes, and the receipt together. That folder saves time at every later service visit. Compare the install year with the Clothes Dryer page to set your planning date.